![background image](http://html.mh-extra.com/html/jai/ab-201cl/ab-201cl_user-manual_631510041.webp)
AM-201CL / AB-201CL
- 39 -
8. Other functions
8.1 Black level control
(Command : BL)
This function adjusts the setup level.
Command value : -1024 to 1023
Variable range : -256 to 255 LSB (at 10-bit output)
8.2 Gain control (Relative commands GA,GJUT1,2,3)
The AM-201CL can adjust the gain level from -3dB to +24dB using 0dB as the reference
(Factory default). In the AB-201CL, the master gain can be adjusted from 0dB to +24dB and
R and B gains can be adjusted in the range of -7dB to + 10dB using the master gain as the
reference.
The AM-201CL and AB-201CL has the resolution of x0.00012/step using both analog gain
(0.00359db/step) and digital gain. In the AB-201CL, blue and red channels can adjust in
x0.00012/step by using digital gain.
Refer to the following drawing.
34dB
24dB
17dB
10dB
0dB
-3dB
-7dB
672
0
-84
Gain
Gain
Setting
Value
Gain Control Range(AM-800CL)
Fig. 37 Gain control
8.3 Tap control (Relative commands AWA, ABA, GJUT1, GJUT2, GJUT3)
The Tap control function adjusts automatically or manually the OFFSET and the gain
differences between the upper and lower taps, and the right and left taps.
The sensor
used in the AM-201CLand AB-201CL divides the effective image area into 4 (four) areas as
shown in the figure 30 in order to achieve its fast frame rate.
The reference tap for all adjustments is Tap ”A”.
AWA:
Adjust the differences of the gain among taps automatically
ABA:
Adjust the differences of the OFFSET among taps automatically
GJUT1:
Adjust the gain of the TAP1R(B) manually
GJUT2:
Adjust the gain of the TAP2L(C) manually
GJUT3:
Adjust the gain of the TAP2R(D) manually
Note: 1) The OFFSET cannot be adjusted individually.
2) TAP A cannot be adjusted individually.
34dB
24dB
17dB
10dB
0dB
-3dB
-7dB
672
0
Gain
Gain
Setting
Value
+17713
0
-4533
+17713
0
-4533
Gain
Setting
Value
Master
R&B
Master
Red
Blue
Gain Control Range for AB-800CL