Finalizing Setup
Check Overall Setup
•
Again, observe clients shoulder and forearm to be sure they are at a comfortable,
level, resting position. (If the client is uncomfortable, WREX wear time and use
will be limited.)
•
Make adjustments as necessary to achieve functional use.
Secure the Settings
Evaluate the WREX with a variety of activities. When you and the client are
satisfied with the overall function, secure the settings.
Insure all knobs are tight.
Using the large T-Wrench insure all screws are tight.
•
Using the small T-Wrench tighten the Jaw Locking Set Screws on the Mount Base
(if applicable) and the Clamp Locking Set Screws on the Mount
Arm. The pointed end of these locking set screws will pierce fabric and/or metal.
Locking the MR-10 Mount Base in Place
Jaw
Locking Set
Screws
Locking the Mount Arm in Place
Clamp
Locking Set
Screw
4-8
Warning: If Further adjustments are required to Mount Base or Mount Arm,
loosen these locking set screws first.
Summary of Contents for WREX
