Attaching the WREX Arm to the Wheelchair Mount
Note:
The WREX arm is designed to have as little friction as possible at all of its
articulations. For client safety please be sure to control the entire device as
you are attaching the arm and making adjustments.
Transfer the patient into the Wheelchair
4-1
1. Using the large T-Wrench loosen but do not
remove the
top screw
on the Pitch Plate
Cover.
2. Orient the WREX arm with the slot in the Roll
Pivot facing up.
3. Slide the Pitch Link into the square hole of
the Pitch Pivot.
WREX Arm Attachment
Summary of Contents for WREX
