Measure and Preset Humeral Elevating Links
1. On the side you plan to fit the orthosis take a
measurement from the head of the humerus
to the lateral epicondyle. Record this
measurement.
2. Lay the WREX arm flat on a work surface.
3. Using the medium T-Wrench remove the
Four
screws that connect the sections of the upper
and lower Humeral Elevating Links
3. By sliding the link sections on each other
shorten or lengthen the Humeral Links until the
distance between the centers of the Upper and
Lower Humeral Pivots is equal to the
measurement from Step 1.
4. Reinsert and tighten the
Four
screws to
secure both links.
3-3
Summary of Contents for WREX
