Preparing Mount Base
MR-10
Mount Base Installation
Moveable Jaw
Base Clamp
Screws
Jaw
Locking Set
Screws
Arm Mount Base
Locking Knob
1. Orient the Arm Mount Base as in illustration above.
Insert the Mount Base Screw (supplied with
Arm Mount Base) thru the Attachment Hole to
the MR-10 Mount Adapter. Using large T-Wrench
secure these two parts.
2. Loosen Clamp Screws using large T-Wrench
Do not remove screws
and open clamp to
its widest position by pushing the Moveable
Jaw forward and pulling it outward as shown in
photo.
2-3
Alignment Slot
MR-10 Mount Adapter
Summary of Contents for WREX
