![background image](http://html1.mh-extra.com/html/jacto/arbus-400/arbus-400_operators-manual_3181959021.webp)
1-21
1
ARBUS 400
PRE
C
A
U
TION
S
There are two methods for supplying the
105-gallons water reservoir. The instructions
for this operation are described in chapter
4 “OPERATIONS AND ADJUSTMENTS” of this
manual. Following are the precautions to be
taken when supplying this reservoir:
• During the 105-gallons tank filling opera-
tion, it is extremely important that all those
engaged in the operation be using the spec-
ified PPEs. It is very important to read the
label of the chemical being used in the ap-
plication. You will find on that label several
information on the product and precau-
tions to be adopted, etc.
• Before beginning to supply the 105-gal-
lons reservoir, make sure that the reser-
voir drain valve is shut.
• The setup residue remaining inside the
supply hose shall be collected with a
bucket and returned to the reservoir
which the mixture was prepared in. Do
not let this residue to drop on the ground.
• Do not contaminate water springs. Sup-
ply of the sprayer shall be carried out at
places designed for that purpose.
• Avoid capturing water from sources such
as rivers, lakes, dams, creeks, etc.
• By following these recommendations,
you will be preserving the environment.
105-gallons reservoir
Warning when using and filling the tank
Water tank for handwashing
• The water tank on this sprayer is for
washing hands only. Only use clean water
when filling this tank. The use of soap or
solutions are prohibited.
• Do not in any circumstances use the wa-
ter for drinking.
• It’s extremely important to keep this tank
always full.
ATTENTION!
Every time the chemical solution is changed, make sure all residues from the last
application have been thoroughly rinsed off. Any remaining residue can cause seri-
ous damages.