![background image](http://html1.mh-extra.com/html/jacto/arbus-400/arbus-400_operators-manual_3181959027.webp)
1-27
1
ARBUS 400
PRE
C
A
U
TION
S
• Before starting transportation, it is very
important that the path over which the
equipment will pass be carefully stu-
dies and that the agencies regulating
such method of transportation be con-
sulted regarding the precautions and
current legislation.
• All highways, roads, local roads, ways
and streets whose utilization characte-
ristics are influenced by natural factors
(climate, growth of tree without man’s
actions, etc.) and construction (material
employed, height of bridges, nearness
of electric networks, roadway width,
etc.). Such characteristics shall be care-
fully evaluated prior to transportation of
the equipment.
• If in doubt, do not transport the equip-
ment. Hire a company specialized in that
kind of service.
• Make sure that the chemical circuit has
been washed and that the chemical re-
servoir has been entirely drained after
such washing. Spill of setup leftovers, al-
though minimal, can endanger the life
of people, animals and cause serious da-
mages to the environment.
• Wash the equipment on the outside af-
ter its use. Even if it appears to be clean,
the ropes employed for fastening the
equipment shall not be used again for
binding foodstuff; they may be conta-
minated and, accordingly, contaminate
such foodstuff.
• Make use of the PPEs when tying the
equipment. If necessary, make a com-
bined use of the mandatory PPEs for
tying the equipment and the manda-
tory PPEs for application of the chemi-
cals. That combination will reduce the
risks of contamination during fastening
of the equipment.
• Equipment fastening to the cart or truck
shall be performed by the tying points
(see figure below). Any tying carried out
at random, while appearing to be safe
and secure, is extremely dangerous and
can cause serious accidents. If in doubt,
contact Jacto.
Transportation safety