![background image](http://html1.mh-extra.com/html/jacto/arbus-400/arbus-400_operators-manual_3181959086.webp)
5-86
5
M
AI
N
TE
N
AN
C
E
ARBUS 400
Operation chart
Table 8: Operation
Operation chart
Periodicity
when re-
ceiving the
equipment
when using the
equipment for
the first time
whenever
spraying
whenever
filling the
tank
Strictly follow the information contained in
this instructions manual.
•
Check all components for integrity.
•
Check the accessory box components.
•
Demand for assembly of components and
accessories, operation and maintenance.
•
Perform cleaning and lubricate all drive
shaft grease points.
•
Check whether the pins and cotter pins
used at the three points are original parts.
•
Make sure about the PTO shaft clearances.
•
Check whether the coupling pins are proper-
ly provided with cotter pins.
•
Remove the pull bar from tractor.
•
Adjust commands to prevent the same from
causing impacts on tractor during opera-
tions.
•
Check the grease fittings for lubrication.
•
Retighten the reservoir fastening nuts.
•
Use personal protections equipment (PPEs).
•
Do not travel at excess speeds.
•
Do not spray chemical against the wind
direction.
•
Caution with electric networks.
•
Do not smoke, eat or drink during the ap-
plication.
•
After the work, take off clothing and take a
shower.
•
Clean the suction filter.
•
Clean nozzles and their strainers.
•