![background image](http://html1.mh-extra.com/html/jacto/arbus-400/arbus-400_operators-manual_3181959032.webp)
2-32
2
A
SS
EM
B
LY
ARBUS 400
Setting up the tractor
Adjust of the parts to couple the machine to the three point
• Levelling box
To adjust the transverse leveling of the
implement, turn the cranck (C) on the le-
veling box.
• Adjusting the third point
Release the lock (D) and turn the sleeve
(E) to adjust the length of the third point
arm. During transport, fasten the plate
of the third point bar to the pin (F) of
the frame.
• Tie arm of the left bar
To adjust the length of the left lift arm to
the pro-per position, loosen the pin and
turn the lower half (B) of the lift arm.
NOTE:
The grease fitting (A) should
point up.
ATTENTION!
The instructions below are a good example of the adjustments that need to be
done to correctly couple the equipment to the tractor three point hitch. We use the
FORD 4600 tractor as an example. However, you should follow the specifications on
your tractor’s instructions manual.
B
C
D
E
F
A