Jackson 100 B/PRB, Service Manual, Page: 31 / 55

TROUBLE SHOOTING GUIDE
PROBLEM
CAUSE SOLUTION
1- No Voltage to dishwasher,
Nothing on machine a. Customer's fuse blown or a. Replace or reset.
operates. circuit breaker tripped.
2- Machine circuit breaker 2- Turn on or reset.
tripped or turned off.
3- Voltage to machine low or 3- Contact your electrician
circuit to machine broken. and/or power company for
repair.
Will not fill with electrical 1- Water hand valve off. 1- Turn hand valve on.
power applied even though
other components work. 2- Master switch not on or 2- Turn on or replace.
(B Model) faulty.
3- Fill switch faulty or loose 3- Replace switch or wire or
wire connection. connection terminal.
4- Solenoid valve does not 4- See instruction page
operate. concerning the Solenoid
valve.
5- Water level control faulty 5- See page on water.
6- Y strainer clogged. 6- Turn water to machine
off, remove plug & strainer
screen, clean & replace.
Will not fill with electrical 1- Customer's water hand 1-Tum hand valve on.
power applied even though valve off.
other components work
(PRB Model) 2- Master switch not on or 2- Turn on or replace.
faulty.
3- Fill switch faulty or loose 3- Replace switch or wire or
wire connection. connection terminal.
4- Rinse motor not operating. 4- Check connection and
voltage to motor repair or
replace as necessary.
5- Water level control does not 5- See instruction page
maintain the water level in the concerning the water level
rinse tank. control for PRB Models.
6- Solenoid Valve does not 6- See instruction page con-
operate cerning Solenoid Valve.
7- Y-strainer clogged. 7- Turn off water to machine,
remove plug. prepare to
catch hot water & strainer
screen, clean & replace.
30