JAC DIV, Translation Of Original User Instructions

Page: 8 / 124

English
8
4 TECHNICAL SPECIFICATIONS
4.1 Technical specifications
DIV DIV-R DIVIFORM D TRADIFORM
Height, lid and frame
open (mm)
1759 1759 1604 1759 1759
Width (mm) 600 600 832 832 832
Depth (mm) 772 772 732 772
Packaging (mm) 800 x 880 x 1250 800 x 880 x 1250
800 x 880 x
1250
800 x 880 x
1250
800 x 880 x
1250
Net weight (kg)
Round tank: 315
Square tank: 300
Round tank: 320
Square tank: 305
260 285 315
Net packing (kg)
Round tank: 335
Square tank: 320
Round tank: 340
Square tank: 325
280 305 335
Motor power rating (kW)
50 Hz: 1.5
60 Hz: 1.8 50 Hz: 1.5
60 Hz: 1.8 50 Hz: 1.5
60 Hz: 1.8 50 Hz: 1.5
60 Hz: 1.8 50 Hz: 1.5
60 Hz: 1.8
Motor type Three-phase Three-phase Three-phase Three-phase Three-phase
220 V (A)
50 Hz: 8
60 Hz: 11
50 Hz: 8
60 Hz: 11
50 Hz: 8
60 Hz: 11
50 Hz: 8
60 Hz: 11
50 Hz: 8
60 Hz: 11
380 V (A)
50 Hz: 4.5
60 Hz: 6.5 50 Hz: 4.5
60 Hz: 6.5 50 Hz: 4.5
60 Hz: 6.5 50 Hz: 4.5
60 Hz: 6.5 50 Hz: 4.5
60 Hz: 6.5
Dividing-moulding
production rate (pieces/h)
400 to 3000
depending on
grid type
400 to 3000
depending on
grid type
400 to 3000
depending on
grid type
Production rate for in-
tank dividing
900 900 900
Dividing-moulding dough
piece min./max. weights
(g)
19 to 2500
depending on
grid type
19 to 2500
depending on
grid type
19 to 2500
depending on
grid type
In-tank dividing dough
piece min./max. weights
(g)
150/950
300/1900 for
10/20 option
150/950
300/1900 for
10/20 option
150/950
300/1900 for
10/20 option
Tank capacity (kg) 19 19 5 5
19 for in-tank
dividing
5 for dividing-
moulding
The minimum hydration rate required for optimum operation is 55% for in-tank dividing and 70%
for dividing-moulding.
4.2 Details of materials in direct contact with dough
Square tank: STAINLESS STEEL 304
Round tank: Cast iron FGL200
Square tank heads: GHA-coated aluminium
Round tank heads: Teflon-coated cast iron
Knives: STAINLESS STEEL 304
Lid: Aluminium AlSi10Mg
Standard grid: Teflon-coated stainless steel 430
Shaped grid: Teflon-coated stainless steel 430 + EN AW-6060
Coarse tamping plate: UHMWPE