jablotron JA-10 Series Manual Download Page 1

Page: 1 / 72

JABLOTRON

ALARMS

a.s.

Pod

Skalkou

4567/33

46601

Jablonec

Nisou

Czech

Republic

www

.jablotron.com

JA-14K(R) Security System Control Panel

A control panel is a fundamental part of the

JA-10

series alarm system and is designed to protect small,

medium or large premises and it offers a lot of parameters and also the system profiles compliy with security

grade 2 requirements.

The control panel has BUS and/or wireless device (when the control panel is equipped with a radio module)

compatibility. It is recommended that only JA-10 devices are used with the system. Proper functionality cannot

be guaranteed when using third party devices.

Caution:

The JA-10 security system can only be installed by a trained technician with a valid certificate issued

by an authorized distributor.

The manual is intended for trained technicians and is valid for control panel firmware LJ60422 and

N-Link configuration software 2.0.0 or higher.

Summary of Contents for JA-10 Series









































































Search results

Summary of Contents for JA-10 Series

Reviews:

Related manuals for JA-10 Series

Brands by name

Popular brands

jablotron JA-10 Series, Manual

Search results

Summary of Contents for JA-10 Series

Reviews:

Related manuals for JA-10 Series

Brands by name

Popular brands