Jabiru Aircraft
Pty Ptd
Installation Manual
Jabiru 2200 Aircraft Engine
REVISION
0 1 2
Dated : March 2006
Page:
24
\\Gateway\library\files\engine_manuals\2200_engine_manuals\Hydraulic_Lifters\Working copies\HL_Installation_Manual_2200_Rev_0.doc
Print Date: 3/8/2006 1:56:00 PM
13
Exhaust System
•
An exhaust system is provided with the engine. Both Pusher and Tractor systems are
available.
•
Muffler Volume – Capacity 3 litres
•
Back pressure at Takeoff Performance – Max 0.2 bar (2.9 psi). Readings taken 70mm
from muffler flange connections. Only complete mufflers supplied with Jabiru Aircraft are
welded – all others require tail pipes to be TIG welded to the muffler body. NOTE: Drilled
ends of pipes go inside muffler cavity. The tail pipes go completely through the muffler
body and are welded on both top and bottom.
•
When fitting the muffler one or more of the exhaust pipes can be loosened at the
connection to the cylinder head to allow easy fit of the muffler. They then must be
tightened.
•
Exhaust Gas Temperature (EGT) - Nominal 650
o
– 750
o
(1202
o
F – 1382
o
F) measured
100mm from the exhaust manifold flange.