Jabiru Aircraft
Pty Ptd
Installation Manual
Jabiru 2200 Aircraft Engine
REVISION
0 1 2
Dated : March 2006
Page:
49
\\Gateway\library\files\engine_manuals\2200_engine_manuals\Hydraulic_Lifters\Working copies\HL_Installation_Manual_2200_Rev_0.doc
Print Date: 3/8/2006 1:56:00 PM
exhaust pipe.
Note that this fitting is not standard
. The installation of the fitting is
best done at the time of order, though if required the exhaust pipe may be returned to
Jabiru and the fitting added. Note that in this case it will normally take around 2 weeks
before the pipe is returned to you. The fitting is welded to the pipe 100mm down from
the exhaust manifold mounting plate.
w) The Tachometer sensor used is a 6.35 x 22 mm analogue magnetic pick-up and is
fitted to a bracket on the alternator housing. Refer to photo below. The sensor picks up
on 2 tags fitted behind the flywheel.
Figure 30. Tachometer Sensor Installation.
