Jabiru Aircraft
Pty Ptd
Installation Manual
Jabiru 2200 Aircraft Engine
REVISION
0 1 2
Dated : March 2006
Page:
48
\\Gateway\library\files\engine_manuals\2200_engine_manuals\Hydraulic_Lifters\Working copies\HL_Installation_Manual_2200_Rev_0.doc
Print Date: 3/8/2006 1:56:00 PM
Figure 28. Oil Temperature Sensor
t) The Oil Temperature Sensor used is a VDO 320 028 which is located in the bottom of
the sump as shown in photo.
Figure 29. Oil Pressure Sensor
u) The oil pressure sensor is located at the base of the oil filter and this can be seen in
photo. The sensor used is VDO 360 001
v) The exhaust gas probe used on Jabiru engines is a VDO 310 306 Pyrometer which is
supplied as a complete kit. The probe is mounted in a fitting which is welded to an
Oil temperature
sensor
Oil pressure sender.
Connect wire “G” to gauge
Wire “WK” is normally not
used, but can be used to
power a low oil pressure
warning light.