Engine Maintenance Manual
Jabiru Aircraft
Pty Ltd
JEM0002-5
Jabiru 2200 & 3300 Aircraft Engines
This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.
ISSUE
1
2
3
4
5
Dated : 2nd June 2015
Issued By: AS
Page: 78 of 103
L:\files\Manuals_For_Products\Engine_Manuals\Engine Maintenance Manual 22 & 33\JEM0002-5.docx
9.26
Engine Removal Procedure
Required Tools:
As listed below
Parts and Material:
N/A
Type of Maintenance:
Heavy Maintenance
Level of Certification:
L2 or LAME (A&P or LSA Repairman / Maintenance)
Return to Service:
L2 or LAME (A&P or LSA Repairman / Maintenance)
Table 15
– Engine Removal
No.
Operation
Tools Required
1
Remove Spinner and Propeller
Phillips Screwdriver
7/16" Socket
7/16" Spanner
2
Remove Carby Heat hose from hot-air muff on
muffler
Flat-bladed Screwdriver
3
Remove Air Inlet Hose from Carburettor and blank
off Carburettor and Air Cleaner
Flat-bladed Screwdriver
2 Plugs
4
Disconnect Throttle Cable
Long Nose Pliers
5
Disconnect Choke Lever
Long Nose Pliers
6
Remove Oil Breather Line
Flat-bladed Screwdriver
7
Remove Fuel Line from Fuel Pump and plug Fuel
Line and Fuel Pump
Flat-bladed Screwdriver
1/4" Plugs
8
Remove starter Motor Cable from Solenoid
7/16" R/OE spanner
9
Disconnect Earth at Battery
10mm R/OE
10 Remove Oil Pressure Gauge Lead
-
11 Remove Oil Temperature Gauge Lead
-
12 Remove Hourmeter Lead (if fitted)
Screwdriver
13 Remove Cylinder Head Temperature Gauge Lead
- (disconnect at cold junction)
14 Remove Exhaust Gas temperature Gauge Lead
-
15 Remove Tacho Lead
-
16 Remove Left and Right Ignition Coil Leads
-
17 Remove Muffler Assy
3/16" Ball End Allen Key
18 Undo Engine Mount Bolts
7/16" Tube Socket
7/16" Spanner
19 Remove Engine from Engine Mount Frame
-