Connector assignments
6
CANio 250 Quickstart Manual, version 1.2
2 Connector assignments
X1
X3
LED
X2
X4
Figure 2-1: Connector assignments
2.1
Connector (X1) power supply 6-32 V DC
The CANio 250 is supplied with DC voltage of 6 V
– 32 V The scope of supply
includes a made-up cable for power supply. The terminal assignment is given
in table 2-1.
The type of connector is: Binder cable socket 99-0976-100-03
The CANio 250 is protected against reverse polarity, undervoltage and over-
voltage. It is switched off in the case of reverse polarity or undervoltage. The
CANio survives overvoltage up to 60 V and load dump undamaged. In the
event of voltages above this, an internal fuse may be tripped. If the internal
fuse is tripped, the CANio 250 is no longer operational and must be returned to
for repair.
The additional digital input is also connected on this connector.
Pin no. X1
Signal
Wire color
1
1
2
3
1
PWR (+)
white
2
GND (-)
brown
3
Additional digital input on pow-
er supply connector
Shield
Table 2-1: Pin assignment power supply