IXIA XGS2-HS Page 8 Getting Started Manual Download

Page: 8 / 90

About This Guide

This

Getting Started Guide

provides instructions for the basic set up and configuration of the XGS2 chassis platform.

The Third-Party Software License document is included with the download package.

Notes, Cautions, Warnings

Icons are used throughout the documentation to draw attention to caution and warning statement, and to highlight information that can help you
make more effective use of your system.

Provides information that needs special attention within text.

Provides information that is needed to avoid potential harm to equipment or the environment.

Provides information needed to prevent certain harm to a person, piece of equipment, or the environment.

XGS2 on ixiacom.com

The

Ixia XGS2 Datasheet

, plus related information, is available from the Ixia website:

www.ixiacom.com/products/XGS2 Chassis Platform

About This Guide | 8

Summary of Contents for XGS2-HS



























































































Search results

Summary of Contents for XGS2-HS

Reviews:

Related manuals for XGS2-HS

Brands by name

Popular brands

IXIA XGS2-HS, Getting Started Manual

Search results

Summary of Contents for XGS2-HS

Reviews:

Related manuals for XGS2-HS

Brands by name

Popular brands