IXIA XGS2-HS, Getting Started Manual

Page: 48 / 90

Initial Configuration XGS2-SD
To perform initial system configuration for the XGS2-SD chassis, do the following:
1.
Connect the monitor, USB mouse and keyboard, and then start the chassis.
2.
When the chassis boots up, log on to the chassis.
The user name is
ixia
and the password is the CPU module serial number found on the sticker located at the back of the chassis.
3.
Once you log on to the chassis,
change the IP address
.
10.0.x.x/16 is the default internal port address. This can be changed from IxExplorer Chassis Properties.
Change IP Address
To change the IP address, do the following:
1.
On the Start menu, click
Control Panel
.
2. Click Network and Internet and then click Network and Sharing Center . The View your basic network information and set up
connections window appears.
XGS2-SD Configuration | 48