IWILL P55XB2, Manual, Page: 85 / 91

85
3.9 Supervisor/User Password Setting
ROM PCI/ISA BIOS (XXXXXXXX)
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
PNP/ PCI CONFIGURATIONI/O SETUP
POWER MANAGEMENT SETUP
LOAD SETUP DEFAULTS
SUPERVISOR PASSWORD
IDE HDD AUTO DETECTION
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
Esc : Quit
F10 : Save & Exit Setup
: Select Item
(Shift) F2 : Change Color
Time, Date, Hard disk Type.....
INTEGRATED PHERALS
USER PASSWORD
HDD LOW LEVEL FORMAT
Enter Password :
You can set either supervisor or user password, or both of them. The differences
between are:
supervisor password : can enter and change the options of the setup menus.
user password : just can enter but do not have the right to change the
options of the setup menus.
When you select this function, the following message will appear at the center of the
screen to assist you in creating a password.
ENTER PASSWORD:
Type the password, up to eight characters in length, and press <Enter>. The password
typed now will clear any previously entered password from CMOS memory. You
will be asked to confirm the password. Type the password again and press <Enter>.
You may also press <Esc> to abort the selection and not enter a password.
To disable a password, just press <Enter> when you are prompted to enter the
password. A message will confirm the password will be disabled. Once the password
is disabled, the system will boot and you can enter Setup freely.
PASSWORD DISABLED.