60
C,CDROM, A
System will first search for hard disk drive , then CDROM
drive, and then floppy disk drive.
This item allows you to determine whether enable the swap floppy drive or not.
The choice: Enabled/Disabled.
During POST, BIOS will determine if the floppy disk drive installed is 40 or 80
tracks. 360K type is 40 tracks while 760K, 1.2M and 1.44M are all 80 tracks.
Enabled
BIOS searches for floppy disk drive to determine if it is 40 or 80
tracks. Note that BIOS can not tell from 720K, 1.2M or 1.44M
drive type as they are all 80 tracks.
Disabled
BIOS will not search for the type of floppy disk drive by track
number. Note that there will not be any warning message if the
drive installed is 360K.
This allows you to determine the default state of the numeric keypad. By default, the
system boots up with NumLock on.
On
Keypad is number keys
Off
Keypad is arrow keys
Selects the default system speed -- the normal operating speed at power up.
High
Set the speed to high
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock
Status
Boot Up System
Speed
Summary of Contents for P55XB2
