79
This item allows you to determine reset the configuration data or not.
Choices are
Enabled
and
Disabled
(default).
This item allows you to determine the IRQ / DMA assigned to the ISA bus and is not
available to any PCI slot.
Choices are
Legacy ISA
and
PCI/ISA PnP
.
This sets the method by which the PCI bus recognizes that an IRQ service is being
requested by a device. Under all circumstances, you should retain the default
configuration unless advised otherwise by your system manufacturer.
Choices are
Level
(default)
and
Edge
.
This allows you to configure your system to the type of IDE disk controller in use.
By default, Setup assumes that your controller is an ISA (Industry Standard
Architecture) device rather than a PCI controller. The more apparent difference is the
type of slot being used.
If you have equipped your system with a PCI controller, changing this allows you to
specify which slot has the controller and which PCI interrupt (A, B,C or D) is
associated with the connected hard drives.
Reset Configuration
Data
IRQ3/4/5/7/9/10/11/12/1
4/15, DMA0/1/3/5/6/7
assigned to
PCI IRQ Activated by
PCI IDE IRQ Map to
Summary of Contents for P55XB2
