IWILL P55XB2, Manual, Page: 54 / 91

54
The category adds one hour to the clock when daylight-saving time begins. It also
subtracts one hour when standard time returns.
Enabled Enable daylight-saving
Disabled Disable daylight-saving
The categories identify the types of 2
channels that have been installed in the computer. There are 45 predefined types and
4 user definable types are for Enhanced IDE BIOS. Type 1 to Type 45 are predefined.
Type user is user-definable.
Press PgUp or PgDn to select a numbered hard disk type or type the number and press
<Enter>. Note that the specifications of your drive must match with the drive table.
The hard disk will not work properly if you enter improper information for this
category. If your hard disk drive type is not matched or listed, you can use
Type ”User” to define your own drive type manually.
If you select Type ”User”, you will need to know the information listed below. Enter
the information directly from the keyboard and press <Enter>. This information
should be included in the documentation from your hard disk vendor or the system
manufacturer.
If the controller of HDD interface is ESDI, the selection shall be “Type 1”.
If the controller of HDD interface is SCSI, the selection shall be “None”.
If you select Type”Auto”, BIOS will Auto-Detect the HDD & CD-ROM Drive at the
POST stage and showing the IDE for HDD & CD-ROM Drive.
TYPE drive type
CYLS. number of cylinders
HEADS number of heads
PRECOMP write precom
LANDZONE landing zone
Daylight saving
Primary Master/
Primary Slave/
Secondary Master/
Secondary Slave