IWILL DN800-L, User Manual, Page: 50 / 60

DN800-SATA/-L Motherboard IWILL
50 IWILL DN800-SATA/-L Series
IMPORTANT
The BIOS does NOT automatically save values that you have modified. If you do not
save your values before you exit the BIOS Setup Utility, all your changes will be lost.
If after making and saving system changes with the BIOS Setup Utility, you discover that
your computer is no longer able to boot, the AMIBIOS supports an override, which will
reset your system to the Failsafe defaults. If that fails, it is possible to manually clear the
present CMOS information through the "Clear CMOS Header" on the motherboard
(Refer to Jumper Settings for more information).
The best advice is to ONLY alter settings that you thoroughly understand. The default
settings have been carefully chosen by AMIBIOS to provide the maximum system
performance and reliability. Even a slight change to the chipset setup may cause potential
and unpredictable failure to the system.