IWILL DN800-L, User Manual, Page: 19 / 60

IWILL DN800-SATA/-L Series 19
Rear Panel I/O Ports
This is an illustration of the Mainboard rear I/O port array
PS/2 Mouse Connector (6-pin Female)
The system will direct IRQ12 to the PS/2 mouse if one is detected. If no mouse is
detected, IRQ12 will be free for expansion cards to use.
PS/2 Keyboard Connector (6-pin Female)
This connection is for standard keyboards using a PS/2 (mini DIN) plug. This connector
will not accept standard AT size (large DIN) keyboard plugs. You may need a DIN to
mini DIN adapter for standard AT keyboards.
Parallel Printer Connector (25-pin Female)
You can enable the parallel port and choose an IRQ through the BIOS. You can choose
between ECP and EPP support through the BIOS setup.
Serial Port (COM1) Connector (9-pin Male)
The COM1 serial port can be used for pointing devices or other serial devices.
Universal Serial Bus Ports (4-pin Female)
Four onboard external USB 2.0 ports are available for connecting USB devices. Refer to
USB 2.0 Ports & Header for more information.
IWILL Components and Jumper Setting