
IWILL DN800-SATA/-L Series 29
DN800-SATA/-L Power Supply
EPS12V
P
OWER
C
ONNECTORS
There are two power connectors on the motherboard of the required EPS 12V power
supply. These are not standard ATX connectors. DN800-SATA/-L needs a minimum
460-watt EPS 12V power supply that complies with the Intel Xeon processor power
supply design guidelines. Find the proper orientation of the connectors and push down
firmly to make sure that the pins are aligned (the connector will only insert properly when
properly aligned). The 8-pin connector is a dedicated power connector to supply power
for the CPUs.
EPS12V PSU Only
IWILL
Components and Jumper Setting
Summary of Contents for DN800-L
