IWILL DN800-L, User Manual, Page: 11 / 60

IWILL DN800-SATA/-L Series 11
DN800-SATA/DN800-L Specifications
Processor Intel® Dual Xeon Socket 604 CPUs
Supports 800MHz FSB
Chipset Intel E7525 Chipset MCH
Intel Hance Rapids
Winbond 83627 THF
Memory 4 DIMMs for 240-pin DDR2 DIMM sockets
Uses Registered DDR2 with ECC or Non-ECC memory
Supports total system memory size of up to 8GB
On-Board
LAN
Intel GbE Controller
One RJ-45 connectors for GbE
Support PME
USB 4 x external USB 2.0 ports by NEC USB controllor
4 x internal USB 2.0 headers by HR
IEEE-1394 3 x IEEE-1394 ports ( 1x external port, 2x internal headers)
Serial ATA
4 Serial ATA ports supported by Silicon Image with RAID 0, 1, 10
(DN800-SATA Only)
2 Serial ATA ports supported by HR
Support Adaptec Host RAID
Support hot swap
Expansion
Slots
One PCI Express x16 slot
One PCI Express x8 slot
Three PCI 32/33 slots
Internal I/O
connector
1 x 34-pin Floppy Connector
4-pin CD-In and Aux-In audio input connector
IDE Bus
2x 40-pin IDE connectors, supports up to four (4) Enhanced IDE
devices
Dual Channel Master Mode
Ultra DMA 100/66/33
IWILL Overview