REL1.1
Page 58 of 71
iWave Systems Technologies Pvt. Ltd.
RZ/G1E SODIMM Development Platform Hardware User Guide
3.2.6
LED
The RZ/G1E HDMI Add-On Module has four Green LEDs and connected from RZ/G1E CPU GPIOs. LED status can be
changed by driving the GPIO High or Low. These
LED’s
(D1, D2, D3, D4) are physically located at the top of the board
as shown below.
Figure 26: GPIO Status LED's
LED Status (D1, D2, D3, D4) in the RZ/G1E HDMI Add-On Module is explained in the following table.
Table 19 GPIO Status LED's
LED’s Name
Net Name
LED Indication
LOW
HIGH
D1
GP0_29/MD6
ON
OFF
D2
GP1_18/MD8
ON
OFF
D3
GP5_7
ON
OFF
D4
GP5_8
ON
OFF
.