iWave iW-RainboW-G22D, Hardware User'S Manual, Page: 27 / 71

REL1.1
Page 27 of 71
iWave Systems Technologies Pvt. Ltd.
RZ/G1E SODIMM Development Platform Hardware User Guide
Pin
No.
SODIMM Edge Connector Signal
Name
Signal Type/
Termination
Description
181 MSIOF2_SS2(GP1_3/MD18) IO, 3V CMOS MSIOF2 frame synchronization signal2 (Or)
General purpose Input/Output.
This pin is connected to GPIO Header J16 Pin
15.
182 GPIO(GP1_14) IO, 3.3V CMOS General Purpose Input/Output.
This pin is connected from 2-Bit DIP switch.
183 VRTC_3V0 O, 3V Power This pin is connected from RTC coin cell
holder.
184 GPIO(GP4_1) IO, 3.3V CMOS General Purpose Input MSIOF2 frame
synchronization signal2/Output.
This pin is connected from 2-Bit DIP switch.
185 GND Power Ground.
186 GND Power Ground.
187 POR_B O, 3V CMOS Active low reset button input.
This pin is connected from Push button switch
SW2 for reset control.
188 USB1_DP IO, 3.3V CMOS USB1 Host data positive.
This pin is connected to on-board dual port
USB Hub.
189 MSIOF2_SCK(GP1_0) I, 3.3V CMOS MSIOF2 Serial clock for transmission (Or)
General Purpose Input/Output.
This pin is connected to GPIO Header J16 Pin
16.
190 USB1_DM IO, 3.3V CMOS USB1 Host data negative.
This pin is connected to on-board dual port
USB Hub.
191 JTAG_TDO I, 3.3V CMOS JTAG Test Data Output.
This pin is connected to JTAG Header J18.
192 VIN_3V3 O, 3.3V Power Supply Voltage.
193 JTAG_TRSTB O, 3.3V CMOS JTAG Test Reset.
This pin is connected from JTAG Header J18.
194 MSIOF2_TXD(GP0_31/MD7) I, 3.3V CMOS MSIOF2 transmit data (Or) General Purpose
Input/Output.
This pin is connected to GPIO Header J16 Pin
17.
195 JTAG_TDI O, 3.3V CMOS JTAG Test Data Input
This pin is connected from JTAG Header.
196 MSIOF2_RXD(GP0_30) O, 3.3V CMOS MSIOF2 receive data (Or) General Purpose
Input/Output.
This pin is connected from GPIO Header J16
Pin 18.
197 JTAG_TCK O, 3.3V CMOS/
10K PD JTAG Test Clock.
This pin is connected from JTAG Header J18.