REL1.1
Page 24 of 71
iWave Systems Technologies Pvt. Ltd.
RZ/G1E SODIMM Development Platform Hardware User Guide
Pin
No.
SODIMM Edge Connector Signal
Name
Signal Type/
Termination
Description
128
NC
-
NC in carrier board.
GPIO(GP4_31) signal from RZ/G1E CPU is
available in this pin.
129
NC
-
NC in carrier board.
GPIO(GP4_30) signal from RZ/G1E CPU is
available in this pin.
130
NC
-
NC in carrier board.
GPIO(GP4_26) signal from RZ/G1E CPU is
available in this pin.
131
GND
Power
Ground.
132
GPIO33/GP4_27
I, 3.3V CMOS
General Purpose Input/Output.
This pin is configured as reset for all the
carrier board peripherals
133
NC
-
NC in carrier board.
GPIO(GP1_11) signal from RZ/G1E CPU is
available in this pin.
134
NC
-
NC in carrier board.
GPIO(GP4_29) signal from RZ/G1E CPU is
available in this pin.
135
NC
-
NC in carrier board.
GPIO(GP4_25) signal from RZ/G1E CPU is
available in this pin.
136
GPIO/GP1_13)
I, 3.3V CMOS
General Purpose Input/Output.
This pin is connected to LCD connector J23 for
LCD power enable control.
137
NC
-
NC in carrier board.
GPIO(GP4_28) signal from RZ/G1E CPU is
available in this pin.
138
NC
-
NC in carrier board.
TPUTO2_C(GP0_22) signal from RZ/G1E CPU is
available in this pin.
139
DU0_DOTCLKIN(GP2_24)
IO, 3.3V CMOS
General Purpose Input/Output (Or) General
Purpose Input/output.
This pin is connected to GPIO Header J16 Pin
14
.
140
USB1_PWEN(GP5_26)
I, 3.3V CMOS
Power enable signal to control USB1 VBUS
voltage.
This pin is optionally connected to USB Power
switch enable pin through resistor and default
not populated.
141
NC
I, 3.3V CMOS
NC in carrier board.
142
VIN_3V3
O, 3.3V Power
Supply Voltage.