22
■
4.9 Confirmation of functions
● Make sure the single sheet testing function is enabled.
(1) Press and display the Utilities screen.
(2) Under Options, confirm that Single Sheet is Enabled.
(See Fig. 4-15)
(3) Close the Utilities screen by pressing or . .
*
Please refer to the B-
H Analyzer’s instruction manual
for the other settings on the Utilities screen.
In the single sheet testing mode, Utilities > Unit
does not allow the unit changes for Le, Ae, and Ve
.
■
4.10 Selecting single sheet testing mode
● Select the single sheet testing mode.
(1) Press
to display the Mode menu.
(2) Move the editing cursor to Sheet, press
and confirm selection
of the single sheet mode. (See Fig. 4-16)
(3) The single sheet testing mode screen is displayed. (See Fig. 4-18)
■
4.11 Confirming POD
● Confirm the POD to conduct single sheet testing.
(1) Press and display the Configuration screen.
(2) Confirm that Setting of Equipment > Pod is SY-956 (Single Sheet).
(See Fig. 4-17)
(3) Press
or
to close the Configuration screen.
*
Refer to the B-
H Analyzer’s instruction manual for the other
settings on the Configuration screen. In the single sheet testing
mode,
the method of the primary winding cannot be selected
by Configuration > Measuring Method > Coil.
Fig. 4-15 Utilities screen
Fig. 4-16 Mode Menu
Fig. 4-17 Configuration screen
Summary of Contents for SY-956
