Iwatsu SY-956, Instruction Manual

Page: 4 / 44

II
Read the following safety information.
Read the next page.
Warnings
● Please be careful with the pole faces of the measuring
yoke.
The edges of the measuring yoke are not chamfered, in order to suppress leakage flux. Touching it
may result in injury (such as a cut on your hand).
● Do not use in an environment with explosive gases.
It may cause an explosion.
● If you notice smoke, foul odor or abnormal noise,
immediately power off this product and remove the
power plug from the receptacle.
Continued use under these circumstances may result in an electric shock or fire. Turn off the main
power switch on the front (
〇
side), and remove the power plug from the receptacle. Then contact
Iwatsu office or our sales distributors for repair. Do not attempt to repair this product yourself.
● Make sure no water gets on or inside this product.
Do not use this product if wet, otherwise an electric shock or fire could occur. If water gets on or
inside this product, turn off the main power switch on the front (
〇
side), and remove the power plug
from the receptacle. Then contact Iwatsu office or our sales distributors for repair.
● Do not place this product on an unstable support such
as shaky base or inclined plane.
Dropping or falling-down of this product could result in an electric shock, injury, or fire. If this product
is dropped or its cover is broken, turn off the main power switch on the front (
〇
side), and remove
the power plug from the receptacle. Then contact Iwatsu office or our sales distributors for repair.
● Do not expose this product to excessive vibration or
shock.
Dropping of falling-down of this product could result in injury.
● Dropping of this product could result in injury to your
body or damage to your property.
Before carrying this product, remove the measurement sample and cables, close the cover, and
then firmly hold it with both hands while carrying so that it does not fall.