- 3 -
CAUTION
•
Do not run the pump dry.
Do not run the pump dry (without liquid inside the pump). Heat generated as a
result of abrasion between elements inside the pump during operation without liquid
may damage the inside of the pump.
•
Do not wet or dampen!
If an electric part or wiring gets wet with the liquid spilled over accidentally, a fire or
electrical shock may be caused. Install the system in a place free from liquid
spillage or leakage.
•
Ventilate!
Poisoning may result during an operation which involves toxic or odorous liquid.
Ventilate the operating site sufficiently.
•
Spill-out accident!
Protective measures should be taken against any accidental spill-out or leakage of
the operating liquid as a result of unexpected damage on the pump or the related
piping.
•
Damaged pump
Never operate a damaged pump. A damaged pump may cause leakage or
electrical shock.
•
Do not damage or change power cable!
Do not scratch, damage, process, or pull the power cable forcibly. An extra load
onto the cable, such as heating the cable or placing something heavy on the cable,
may damage the cable and finally cause a fire or an electrical shock.
•
Arrange grounding!
Do not operate the pump without connecting the grounding wire. Otherwise, an
electrical shock may result. Make sure the grounding wire is connected with the
grounding terminal.
•
Install an earth leakage breaker (option)!
The operation of a pump without using an earth leakage breaker may cause an
electrical shock. Please purchase an optional leakage breaker and install in the
system.
•
Handling of power cable
Use of a defective or damaged power cable may result in a fire or electrical shock.
Handle the power cable carefully.
Prohibited
Electrical Shock
Caution
Caution
Caution
Grounding
Safety Section
Do not wet
or dampen
Prohibited
Electrical Shock
