- 2 -
WARNING
•
Turn off the power supply.
Working without disconnecting the power supply may cause an electrical shock.
Before engaging upon any working procedures involving the pump, make sure to
turn the power supply switch off and to stop the pump and other related devices.
•
Terminate operation!
When you detect or become aware of a dangerous sign or abnormal condition
during operation, terminate the operation immediately and start it from the beginning
again.
•
For specified application only.
The use of a pump in any application other than those clearly specified may result in
injury or damage to the pump. Use the pump strictly in accordance with the pump
specifications and application range.
•
No remodeling!
Never remodel a pump. Otherwise, a serious accident may result. Iwaki will not be
responsible for any accident or damage of any kind which is caused by the user
remodeling the pump without first obtaining permission or instructions from Iwaki.
•
Wear protectors.
If you touch or come in contact with any type of hazardous chemical liquid, including
but not limited to chemicals, you may experience a serious injury. Wear protective
gear (protective mask, gloves, etc.) during the pump operation.
•
Operating site must be free of water and humidity
The pump is not designed to be water-proof or dust-proof. The use of the pump in
places where water splashes or humidity is high may result in an electrical shock or
short circuit.
CAUTION
•
Qualified operators only!
The pump operator and pump operation supervisor must not allow any operators
who have little or no knowledge of the pump to run operate the pump. Pump
operators must have a sound knowledge of the pump and its operation.
•
Specified power only.
Do not operate the pump on voltage which is not specified on the nameplate.
Failure to do so may result in damage or fire. Only the specified power level is to be
applied.
Safety Section
Electrical Shock
Prohibited
No Remodeling
Prohibited
Wear protective
gear
Prohibited
Prohibited
