OPERATING INSTRUCTIONS
Telephone Radio Switch Set 433 MHz KD-204
Intended use
The telephone radio switch set consists of three outlet and one telephone radio switch. Up to three different consumers supplied with mains power
can be switched with this set. The power consumption of the connected consumers may not exceed 3600 Watt.
The radio switch set is suited for devices of protection class 1 and 2.
It is controlled via a wireless remote control, which can operate all consumers individually or altogether.
In addition, a wireless telephone unit enables controlling the radio outlets via a tone dial phone.
The access to this wireless telephone switch is protected by a code.
A timer function is integrated in the radio outlets as well as the option to operate the outlets manually directly on the outlets.
Any use other than that described above could lead to damage to this product and involves the risk of short circuits, fire, electric shock, etc.
The product must not be changed or modified in any way. Do not open the housing! All safety and assembly instructions must be observed without
fail!
Safety instructions and hazard warnings
Please read through the operating instructions completely before using the product for the first time; they include important information
necessary for correct operation.
•
The guarantee will be rendered null and void if damage is caused as a result of failure to observe the operating instructions. We will not
assume any responsibility for any consequential damage.
•
We will also not assume any responsibility for damage to assets or for personal injury caused by improper handling or failure to observe the
safety instructions. The warranty will be rendered null and void in such cases.
•
This product has been CE-tested and meets the necessary European guidelines.
•
Do not use this product in hospitals or medical institutions. The product does only emit relatively weak radio signals. These radio signals could,
however, lead to malfunctions in life-supporting systems. The same may possibly apply to other areas.
•
For safety and licensing (CE) reasons, unauthorized conversion and/or modifications to the product are not permitted.
•
The product is designed in conformity with protection class 1. The only voltage source that may be used is the correct mains socket-
(230V/50Hz) of the public power supply system.
•
Devices operated using the mains voltage must be kept out of the reach of children. Particular care must therefore be exercised if children are
around. Do not disassemble the product! There is a risk of a fatal electric shock.
•
Do not leave the packaging material lying around carelessly since this may become a dangerous toy for children.
•
The product is only suited for dry indoor rooms (no bathrooms or similar damp interiors). Avoid penetration of wetness or dampness into the
device. There is a risk of a fatal electric shock.
•
The accident prevention regulations of the relevant trade associations for electrical systems and operating materials are to be observed in
commercial institutions.
•
Consult qualified staff, if you have doubts about how the equipment operates or about how to connect it safely.
•
The device is turned off via a micro contact. Never open or dismantle the connected devices, even if the wireless outlet is turned off! There is a
risk of a fatal electric shock.
•
Handle the product with care. It will be damaged through impact, blows, or by being dropped even from a low height.
•
Observe also the operating instructions for the devices to be connected.
Scope of delivery
1 Radio remote control; 3 wireless outlets; 1 wireless telephone switch; 1 western telephone cable; 2 batteries (9 V block); 1 set of operating
instructions
Declaration of conformity
We, IVT Innovative Versorgungs-Technik GmbH, Dienhof 14, 92242 Hirschau, hereby declare that this product adheres to the fundamental
requirements and the other relevant regulations of Directive 1999/5/EC.