9
2. Safety First
This chapter is especially important for individuals who work with the Programat EP 3010 G2 or who have to carry
out maintenance or repair work. This chapter must be read and the corresponding instructions followed!
2.1 Indications
The Programat EP 3010 G2 must only be used to press and fire dental ceramic materials and it should be used for this
purpose only. Other uses than the ones stipulated, e.g. cooking of food, firing of other materials etc., are contraindicated.
The manufacturer does not assume any liability for damage resulting from misuse. The user is solely responsible for any risk
resulting from failure to observe these instructions.
Further instructions to assure proper use of the system:
– The instructions, regulations and notes in these Operating Instructions must be observed.
– The instructions, regulations and notes in the material‘s Instructions for Use must be observed.
– The system must be operated under the indicated environmental and operating conditions (Chapter 9.3).
– The Programat EP 3010 G2 must be properly maintained.
Risks and dangers
The furnace head should not be removed from the furnace base as long as
the furnace head is connected by means of the heater cable.
Make sure that no liquids or other foreign substances enter the furnace.
Burn hazard
: Never place objects in the firing chamber by hand, since there is
a burn hazard. Always use the tongs (accessories) supplied for this purpose.
Never touch the hot surface of the furnace head, as there is a burn hazard.
Do not carry the furnace by the cooling tray.