17
EN
G
L
IS
H
Procedure for start-up from IVECO MOTORS
secondary or fly-bridge
control panel
(supplied on
demand)
1. Enable the secondary control panel, by turning the key switch
on the main panel to position
8B
(requirements and procedure
given in previous paragraph).
2. Wait for the beeper to stop sounding and for the alarm indicator
lights to switch off, with the exception of the “Alarm malfunction”
and “Low oil pressure” indicators. At the same time, check that the
indicator test has been performed successfully (see the section on
RECOGNIZING ALARMS).
3. Press the green START button (11) and release it when the engine
has started, making sure that the instruments with analogue displays
are showing values that conform with the new physical parameters.
1. Engine coolant temperature indicator - 2. Lubrication circuit pressure
indicator - 3. Service and alarm signals - 4. Rev counter - 5. Supercharged
air pressure indicator - 6. Voltmeter - 7. Alpha-numeric display -
8. Button to stop the engine - 9. Button used to scroll through and select
additional information - 10. Button to disable the beeper- 11. Engine
start button.
1
2
6
5
3
3
4
7
10
11
9
8
04_358_N
