1
IQ Power HLC Power Supply
& Control Station
5201259 Rev. D
1. SAFETY WARNINGS
Simco-Ion recommends that these instructions be read completely before installation
or operation is attempted. Failure to do so could result in personal injury and/or
damage to the equipment.
NOTE
– Statements identified with NOTE indicate precautions necessary
to avoid potential equipment failure.
CAUTION
– Statements identified with CAUTION indicate potential
safety hazards.
ATTENTION
– Les déclarations identifiées avec ATTENTION indiquent
des dangers potentiels pour la sécurité.
WARNING
– Statements identified with WARNING indicate potential
serious injury hazards.
AVERTISSEMENT
– Les déclarations identifiées avec AVERTISSEMENT
indiquent un risque de blessures graves.
NOTE
– This equipment must be correctly installed and properly
maintained. Adhere to the following notes for safe installation and
operation:
1. Read instruction manual before installing or operating equipment.
2. Only qualified service personnel are to perform installation and repairs.
3. All equipment must be properly grounded, including machine frame to which
the equipment is mounted.
4. Disconnect input power to Power Supply before connecting or disconnecting
static neutralizing bars to high voltage Power Supply.
5. Do not use standard Ethernet cables with IQ Power Systems.
CAUTION
– This product is intended to be supplied by a Listed AC
Adapter or Power Unit marked “Class 2” or “LPS” and rated output 24
VDC, 1.6A.
ATTENTION
– Ce produit est destiné à être alimenté par un adaptateur
de courant alternatif ou transformateur listé “classe 2” ou “LPS” et avec une
puissance nominale 24 VDC, 1.6A.
