2. Replace the old sealing washers with new ones.
3. Fit the 3 self-tapping screws.
Tightening torque: 7 Nm (5 ft-lbs.)
If you have bought an oil housing as a spare part, there will not be any threads in the 3 holes for the
screws (self-tapping screws).
Install the outer mechanical seal: Griploc
Use the instructions in
Install the inner mechanical seal: Griploc
(page 32) to install the outer mechanical seal.
Install the motor cable in the stator housing
1. Pull the cable into the junction box.
Maintenance (Continued)
Flygt 3102 Service and Repair Instructions
35
