2. Then quickly lower the stator into the stator housing until it bottoms.
Use a lifting device.
NOTICE:
The stator must be oriented in the stator housing so that the stator leads reach the motor cable
connection.
3. Connect the leads according to applicable cable chart.
Install the mechanical seal
Install the inner mechanical seal: Griploc
The following items are needed for these procedures:
• Oil
• Grease
• 8 mm flat bladed screwdriver
• Mounting tool (included)
1. Mount the stationary seal ring:
a) Lubricate the O-ring.
If the stationary seal ring has a mechanical torque lock the O-ring can be lubricated with oil or grease.
Maintenance (Continued)
32
Flygt 3102 Service and Repair Instructions
