3. Disconnect the motor cable and the stator leads from the terminal board.
4. Pull out the stator leads through the cable lead trough in the stator housing.
5. Undo the cable entry and pull the motor cable out of the entrance cover.
Inspect the cable for damage, especially close to the cable entry.
Remove the pump housing
1. Remove the pump housing screws.
2. Fasten lifting eye bolts in the oil housing screw holes.
Use M10 eye bolts.
3. Lift of the rotor assembly with the oil housing and impeller from the pump housing.
Maintenance (Continued)
26
Flygt 3102 Service and Repair Instructions
