d) Compress the seal unit with the mounting tool.
Press the seal as far as it will go without forcing it.
4. Fasten the seal using a screwdriver.
Do not put pressure on the screwdriver while fastening the screw. Tightening torque: 5.4 Nm (4.0 ft-
lbs.)
5. Remove the mounting tool.
Install the oil housing bottom
1. Install the oil housing.
Check that the sleeve for the oil refill can pass unobstructed from the cutouts in the bearing holder.
Maintenance (Continued)
34
Flygt 3102 Service and Repair Instructions
