Original notice - A1.20
7.
Installation/Wiring
35
Mount customer-prepared zone sensor and area sensor for loading and discharging,
as well as power supply units, and PLCs.
・
Refer to the labels for cables coming from the F-RAT main unit, and securely
ޓޓ
connect the MDR connectors and driver cards.
・
When using extension cables, securely connect them to the MDR connectors, as
well as to the driver card connectors.
Use the included screws and nuts to mount driver
cards on the conveyor frames or control panel.
Mounting driver cards
Connection between the
F-RAT main unit and
driver cards
Mounting sensors,
control devices, and
power supply units
7-3.
Wiring
1.5
〜
1.9N
㨯
m
HBM-201
M1
M1
M3
M3
M2
M2
Roller MDR
Drive switching MDR
Carrier wheel MDR
For roller MDR
For carrier wheel MDR
For drive switching MDR
CB-016
CBK-109
M3
Lifting
M1
Belt・
CRR.Wheel
M2
Roller
Wiring
Mounting driver cards
Mounting sensors, control devices, and power supply units
Connection between the F-RAT main unit and driver cards
■
Recommended tightening torque:
1.5 to 1.9N·m
F-RAT-NX75 Technical document
Safety precautions
Advance preparation
Product check
Structures
Installation/Wiring
Control/Operation
Maintenance/Inspection
Tr
oubleshooting
Appendix
