Original notice - A1.20
11
Do not turn the driver card switches with excessive force.
Perform wiring when the power is shut off.
Failure to follow this could result in electric shock and/or accidents due to
unexpected operation.
Failure to follow this could result in malfunction.
Take appropriate measures to prevent trays from popping out of
the equipment.
For example, mount guide rails on the conveyor frames.
Failure to follow this could result in workers getting injured by trays popping out of
the equipment.
If necessary warning/caution labels become hidden after installing
fences, affix again on places where they can be seen.
Do not change switch settings for HBM-201.
Failure to follow this could result in malfunction, and/or accidents due to
unexpected operation.
Do not change the VR1 and VR2 values on CBK-109 and CB-016.
(Minimum (leftmost): Factory setting)
When attaching or removing connectors, turn off the power first,
securely hold connectors, and perform operation.
Also, do not apply excessive force to the driver card connection
parts, such as obliquely attaching or removing connectors.
Failure to follow this could result in electric shock, malfunction, and/or accidents
due to unexpected operation.
Securely attach connectors to the driver card connection parts.
Improper wiring could result in electric shock and/or malfunction.
Perform wiring to connectors so that cables make secure contact
with connectors.
Make sure that connectors are tightly and correctly connected to avoid
over-heating or short circuits.
3-3.
Precautions on wiring
3-4.
Precautions related to
control
Precautions on wiring
F-RAT-NX75 Technical document
CAUTION
CAUTION
CAUTION
3-2.
Precautions on
installation
3.
Safety precautions
Safety precautions
Advance preparation
Product check
Structures
Installation/Wiring
Control/Operation
Maintenance/Inspection
Tr
oubleshooting
Appendix
