ITI ITI UltraGard, Installation Instructions Manual

Page: 42 / 64

Appendix C: Programming Tables
38
20
Delayed
Interior PIR motion sensors that initiate a delay
before going into alarm.
*
Police Standard
√ √
3
21
Local
Instant
Interior 24-hour local alarm zone protecting
anything that opens and closes. Police Instant
√ √
1, 2, 3
22
Local
Delayed
Interior Same as group 21, plus activation ini-
tiates a delay before going into alarm. Police Standard
√ √
1, 2, 3
23
Local
Instant
Auxiliary 24-hour local alarm zone protecting
anything that opens and closes. ‡ Auxiliary Instant
√ √
1, 2, 3
24
Local
Instant
Auxiliary 24-hour local alarm zone protecting
anything that opens and closes. Sirens
shut off at restoral.
*
Auxiliary Instant
√ √
1, 2, 3
25
Local
Special
Chime Notify the user when a door is opened.
Sounds emit from a local annunciator.
*
Special
Chime Instant
√
1, 2, 3
26
Fire 24-hour fire, rate-of-rise heat, and
smoke sensors.
§
Fire Instant
√ √ √
1, 2, 3
27
Output
Module Hardwire Output Module (HOM) lamp
control or other customer feature.
‡
Silent Instant
√ √
1, 2, 3
28
Output
Module HOM, PIR motion sensor, sound sen-
sor, or pressure mat.
‡
Silent Instant
√
1, 2, 3
29
Auxiliary Freeze sensor. Auxiliary Instant
√ √
1, 2, 3
32
Output
Module HOM, PIR motion sensor, sound sen-
sor, or pressure mat.
‡
Silent Instant
1, 2, 3
Note: Check marks (
√
) represent characteristics present in a group.
* This group is not certified as a primary protection circuit for UL-listed systems and is for supplementary use only.
†
Sounds instant police siren if two or more sensors are tripped within 4 minutes. Otherwise sensors are followers to delayed
sensors. If central station feature 15 (Alarm Verification) is on, group 18 functions like group 17.
‡
This group has not been investigated by UL.
§ This group is required for UL-listed residential fire alarm applications.
Table C.1 Sensor Group Characteristics (Continued)
No. Name Application Alarm Delay Restoral Supervisory
CS
Report
Chime
Active
Levels