Console user manual
6
01 - 10 - 2004
Buttons in the Hi Drive page, without Memory Card
Extra data that can be set and displayed with Memory Card:
Slow motion speed
(picks/min, standard value = 10)
Maximum speed
(picks/min * 10). Once set, switch the loom
off and then back on.
Forwards pick-finding speed
(picks/min, standard value =
55).
Reverse pick-finding speed
(picks/min, standard value = 55).
Forwards self-positioning speed
(picks/min, standard value
= 35).
Reverse self-positioning speed
(picks/min, standard value =
25).
Drive status
Drive temperature
Drive alarm code
Current in motor; current and voltage in brake.
Motor encoder value
(jogging)
Loom/dobby staggering, actual and set,
in steps (1 step =
4.28°). Not enabled here.
To increase
the loom speed by 1 pick/min.
To decrease
the loom speed by 1 pick/min.
Manual use of the brake.
Manual use of the coupling and adjustment of encoders and
sensors.
Sensor check.
To access the zone table.
A.
