01 - 10 - 2004
Console user manual
25
41
Re-synchronising not possible: carry out one turn in slow motion
42
Internal error 42
43
Internal error 43
B – ERRORS DURING RE-SYNCHRONISING
111
No coherence between motor encoder and main loom encoder – Switch off and
then back on again
112
Unaccepted motor status before starting a movement
113
Internal error 03
114
Movement timeout
115
Movement stop timeout
116
Operation aborted due to a power fail
117
Drive not enabled – Check enabling circuit
118
General emergency active (e.g. the mushroom button has been pressed) before
starting a movement
119
Photocells in emergency mode before starting a movement
120
General emergency active (e.g. the mushroom button has been pressed) during a
movement
121
Photocells in emergency mode during a movement
122
Internal error 12
123
Movement interrupted by coherence sensors (rapiers in shed when shed closed)
131
Incorrect end to rotation
C – ERRORS DURING COUPLING
211
No coherence between motor encoder and main loom encoder – Switch off and
then back on again
212
Unaccepted motor status before starting a movement
213
Internal error 03
214
Movement timeout
215
Movement stop timeout
216
Operation aborted due to a power fail
217
Drive not enabled – Check enabling circuit
218
General emergency active (e.g. the mushroom button has been pressed) before
starting a movement
219
Photocells in emergency mode before starting a movement
220
General emergency active (e.g. the mushroom button has been pressed) during a
movement
221
Photocells in emergency mode during a movement
