Itel DPRO3 User Manual Download Page 58 | Manualshive

Page: 58 / 59

background image

58

DPRO3 FM Audio Processor

© 2016 ITEL Elettronica e Telecominicazioni Snc

5

Streaming audio module

The module adds audio streaming decoding capabilities for receiving streaming MP3 / AAC +
shoutcast servers or by using RTP and TCP / IP connectivity. The module also allows playback of
audio files from an USB key.

The audio output is transferred in digital format to audio processor / stereo encoder, thus achieving
the highest audio quality.

An helpful guide for all settings appears on the side of the configuration page.

5.1

Quick setup

The default IP address is

192.168.1.100

.

If the IP is unk nown, connect the the processor directly to a PC network card, then use the supplied
utility "module_finder.exe" to recover its IP address.

Connect the apparatus to your LAN and turn it on. Open a web browser on a PC from which the
apparatus can be reached and type on the web browser's address bar: http://192.168.1.100.
The audio module internal webserver should then load the default page.
Go to the "CONFIG" menu and set one or more URLs from which to receive the audio stream.
Save current configuration by pressing the "SAVE & REBOOT" button, wait for the restart of the
module.

Configure the network settings of the module: SETUP -> NETWORK
Save by pressing the "SAVE & REBOOT" button, wait for the restart of the module.

On the audio processor, now select the audio input

and the streaming audio received by

the module should be put on-air.

«
...
56
57
58
59
»

Summary of Contents for DPRO3




























































Reviews:

No comments

Related manuals for DPRO3

Ray 3 Plus Client

Brand: Sun Microsystems Pages: 6

Brand: Salusfin Pages: 6

Brand: Dahua Pages: 24

Brand: DAQ system Pages: 41

Brand: DAQ system Pages: 19

Brand: FOR-A Pages: 39

Brand: Campbell Pages: 38

Brand: A2B Electronics Pages: 24

Brand: ZALMAN Pages: 6

Brand: FDI Pages: 2

Brand: uneron Pages: 13

LatticeMico GPIO

Brand: Lattice Semiconductor Pages: 28

Brand: Extron electronics Pages: 19

Kontron CP3005 Series

Brand: S&T Pages: 115

Braswell Series

Brand: Intel Pages: 54

Brand: audemat Pages: 93

Xtreme Networked Boat

Brand: Broadband Products Pages: 16

BPN-SAS3-116A-N10

Brand: Supermicro Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands