Itel DPRO3 User Manual Download Page 34 | Manualshive

Page: 34 / 59

background image

34

DPRO3 FM Audio Processor

© 2016 ITEL Elettronica e Telecominicazioni Snc

1

International coverage

2

National coverage

3

Supra-regional coverage

4..F

area codes for regional coverage stations

Note:  the local coverage code “0” is  intended for stations  having one frequency only,  so  its  use  is
intended  just  in  this  case.  If  the  station  has  more  than  one  frequency,  a  supra  regional  (3)  or
regional code (4 to  F)  must  be  used.Using  the  local  coverage  code  (0),  mak e  many  receivers  to
ignore the alternative frequencies tables.

The two last digits uniquely identify the station into its coverage area and shall be different amongst
all other stations broadcasting over the same area.

Some examples:

5001: Italian radio station (5)

local coverage

(0),

program identifier code 01

5202: Italian radio station (5)

national coverage

(2),

program identifier code 02

54AF: Italian radio station (5)

regional coverage

(4),

program identifier code AF

TP:

Traffic program

This flag indicates that your station, during normal programming, broadcasts traffic programs.

TA:

Traffic Annonunce

Traffic Announce on air.
This flag should be set when traffic related news are being broadcasted.
For this reason, the TA flag can be switched by the external control port.

MUSIC:

This flag indicates if the station main format is music or speech.

Some receivers use this information to apply a different tone equalization or volume according to
whether music or speech is being broadcasted.
It is possible to switch this flag externally, using the external control port.

ARTIFICIAL HEAD:

This flag indicates that the program was recorded using an artificial head.

This device is a dummy human head with two microphones inserted into the auditory canals, used
during the recording process of the performance or live event, to accurately reproduce the original
spatiality.

COMPRESSED:

This flag indicates that the program was compressed.

ENABLE RADIOTEXT:

Flag to enable radiotext group (2A) transmission.

If disabled, only 0A groups will be trasmitted.

STATION ID:

This 16-chars string can be assigned to the coder for its identification.

It could be its destination, the site to which the encoder is assigned, or the name of the radio which
owns it.
It will not be shown anywhere else, neither transmitted into any RDS block; it is only a label to
identify the processor.

«
...
32
33
34
35
36
...
»

Summary of Contents for DPRO3




























































Reviews:

No comments

Related manuals for DPRO3

Brand: SIIG Pages: 12

Brand: IDT Pages: 93

Brand: Barco Pages: 30

LIQMAX III ELC-LMT120-ARGB

Brand: ENERMAX Pages: 32

Brand: Atmel Pages: 2

Brand: S&T Pages: 28

Brand: Altera Pages: 40

Brand: Milesight Pages: 15

Brand: Zonet Pages: 1

Brand: Intel Pages: 44

PCI4-AD-x16HI-BG4

Brand: Serial Cables Pages: 15

Brand: IEI Technology Pages: 116

Brand: Adaptec Pages: 2

Brand: IEI Technology Pages: 213

Brand: MSI Pages: 44

Brand: MSI Pages: 42

Brand: Crestron Pages: 2

Brand: East Coast Datacom Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands