![background image](http://html1.mh-extra.com/html/itech/it8600-series/it8600-series_programming-manual_2095285020.webp)
Measurement Commands
Copyright © Itech Electronic Co., Ltd.
9
Chapter2
Measurement Commands
MEASure
?
FETCh
?
This command is used to read the measurement value of electronic load.
The sequence of measurement data is listed in the following table:
Measurement Value
Description
CURR_DC
Direct current value
CURR_RMS
Current effective value
CURR_MAX
Current maximum value
CURR_MAXP
The positive peak current
CURR_MINP
The negative peak current
VOLT_DC
Direct voltage value
VOLT_RMS
Voltage effective value
VOLT_MAX
Maximum voltage
POW_ACT
Active power
POW_APP
Apparent power
POW_REAC
Reactive power
POW_MAX
Maximum power
RES
Resistance
FREQ
Frequency
CURR_CFAC
Crest Factor
POW_PFAC
Peak Factor
VOLT_THD
Total harmonic distortion of voltage
ETIME
Elapsed time under timing mode
TEMP
Temperature
Returned value:
<NR3>
MEASure:CURRent?
FETCh:CURRent?
This command is used to read the current average value in load input terminal.
Command syntax:
MEASure[:SCALar]:CURRent[:DC]?
FETCh[:SCALar]:CURRent[:DC]?
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com